How to make Squid 3.3.5 as Transparent Proxy Https / Ssl in Centos 6.4

The experiment continues to make transparent proxy https / ssl. Same as previous post. Look at "How to make Squid 3.1.23 as Tproxy (Transparent Proxy) in Centos 6.4". Do the step 1 and 2, ie install shorewall and install dhcp server. Then continue with the next steps.

How to make Squid 3.1.23 as Tproxy (Transparent Proxy) in Centos 6.4

From the title, we will only make squid tproxy (transparent proxy), but there are actually 3 work to be done.

1. Configuration of the firewall / shorewall so Linux Centos  will become a router.

2. Make dhcp server, and

3. Install squid as tproxy ( I use squid version 3.1.23 ).

We will work on gradually, so you can easily fix it if there is an error.

How to Create Voucher in Mikrotik User Manager

This post continues the previous post. Make sure you've managed to create a Mikrotik User Manager as Radius Server. In this post, I will explain how make voucher easily. There are 2 types of vouchers are often used, first, vouchers that use time limit, and second, vouchers that use quota limit.  You will be able to develop, by combining the two types, so get a voucher that uses a time limit and quota limit.

Let's go to make it. This is the plan.

1. Time Voucher 2 hours, price 5,000, expired 10 days from the start of use.
2. Quota Voucher 1 GB, price 3,000, expired 30 days from the start of use.

Mikrotik User Manager as Radius Server

I continue to post about hotspot billing system. Actually I wanted to post about Daloradius. However, because still need more experiments, then I delay for a while. And now I'm posting about the "user manager" of the Mikrotik. What is a user manager? User Manager is a RADIUS server application. It is a separate package for RouterOS.

Modify Easyhotspot as Radius Server External

EasyHotspot is an open source software, so it should not matter, if you make modifications. In this post, I will change a little EasyHotspot. And this relates to the previous post, Mikrotik and EasyHotspot as Hotspot, we can’t disconnect user  from radius server / EasyHotspot. so what should we do?

First, we must know how to disconnect the user. General command to disconnect users, in a radius server, including easyhotpsot, using the command radclient.

Mikrotik and EasyHotspot, as Hotspot Billing System

In the previous post, we already know about the mikrotik hotspot. And the next experiments, mikrotik hotspot added a EasyHotspot as radius server. Can be seen in the picture. In this experiment, Chillispot and login page, on EasyHotspot, not used and should be removed. Mikrotik will replace the function of Chillispot and login page. Actual merger mikrotik with radius server, I've created, in a project by PT xxx. But I had forgotten what a hotspot billing system used. And it is not archived.

Configure Mikrotik as a Hotspot Server

 

There are many posts on how to configure Mikrotik as hotspot. But I am sure this is not the result of a cheat sheet. Even if some of section are the same, it was fate. Mikrotik is a friendly operation system, and is very easy to configured. Enough to know the concept of network, plus with a Winbox, then you will easily configure the Mikrotik, in accordance with your wishes. I configured wireless outdoor of mikrotik, as a hotspot. I forget the type of the mikrotik. It's been a long time. And now for the post on this blog, I configure the mikrotik hotspot again, but this time, the mikrotik is installed inside vmware.

Let’s begin.